Furnace Always Running? Get Furnace Repair in River Hills

A constantly running furnace is both a nuisance and a serious concern. At best, you may wonder how much money you’re wasting when your next utility bill rolls around. At worst, you could end up with an overworked furnace that shuts down later.

If you’re wondering whether you need furnace repair in River Hills, WI, let’s first explore the reasons behind this common issue. Sometimes this issue can be fixed with a little home maintenance, while other causes require a professional. 

3 Simple Reasons Behind Your Furnace Running Constantly in River Hills

Is your furnace damaged or just a little dirty? Start your process of elimination with the simplest reasons behind your heating unit’s odd behavior.

1. Extremely Dirty Filter

Your furnace might be constantly running because a very dirty filter is affecting its airflow. Without good airflow, your equipment struggles to raise the room’s temperature. Since its thermostat is still telling the unit the room is too cold, it stays on.

You should swap out your dirty filters for a clean one every few months. Active households with children or pets should do so every three months, while singles and couples will likely do fine every four to five months.

2. Incorrect Thermostat Settings

Alongside dirty filters, sometimes your thermostat isn’t working quite right, telling your furnace it’s cold when it’s actually warm or vice versa. If it’s sending cooler readings, your equipment will stay on until that reading changes.

Check your thermostat to make sure it’s set to the appropriate temperature (we recommend between 68 to 75 degrees Fahrenheit). If it is, try lowering or raising the temperature a few degrees to see if a different setting stops your furnace from running. 

No dice? Try the third item on this list; if not, you’ll need a professional to see why your furnace runs constantly in River Hills.

3. Wrong Setting

This suggestion may seem obvious, but overlooking the setting is one of the most common reasons behind a constantly running furnace! Make sure your furnace is set to the heating function, then try the ‘On’ setting instead of ‘Auto’. 

The ‘On’ setting makes your furnace’s fan continuously run, while the ‘Auto’ setting makes your furnace run only when it’s heating. 

Short-cycling furnaces are also a frustrating occurrence. If your equipment runs too long or not long enough, you may have some deeper problems that need addressing. 

3 Serious Reasons Behind a Constantly Running Furnace

If you have the right settings and clean filters, your furnace is trying to tell you something else is at play. Let’s take a look and see why your equipment keeps running without explanation.

1. Malfunctioning Blower Fan

Your blower fan is responsible for sending warm air throughout the house. If it’s damaged or failing, it might ‘confuse’ your furnace into thinking the room is colder than it actually is. 

You can’t fix a malfunctioning blower fan on your own. An experienced heating technician needs to safely inspect your furnace and see if you need a repair or a replacement. 

2. Improper Sizing

A furnace that isn’t properly sized for your home will often swing to one of two extremes: short cycling or running constantly. These extremes point to how it’s either heating too fast or not fast enough.

If you’ve had your furnace for years and suspect it’s too small, we can help you with a new furnace installation. We combine in-person inspections with industry-standard manual load calculations to find the best size for your home.

3. Faulty Limit Switch

Your limit switch is a safeguard to protect your furnace from overheating. This switch connects to your thermostat to make sure your heating unit knows when to stay on and when to turn off.

If this limit switch is malfunctioning or broken, it won’t send the right signals at the right time, hence the constantly running issue you’re experiencing.

You need to keep your furnace in peak condition for Wisconsin winters. Southport offers expert furnace repair in River Hills, WI, for issues like constant running, short cycling, and shutdowns.

When Should You Call for Heating Repair in River Hills?

Your furnace should give you steady heating whenever you need it. If you fit any of these descriptions, a repair visit can finally nip this irritating problem in the bud:

• You’ve tried changing filters or thermostat settings with no luck
• You have no backup heating options in your home
• You also notice other strange signs like odd noises or a glitching interface

The sooner you get your furnace repaired, the better. Failing to fix a furnace running constantly in River Hills can cause ongoing damage and lead to future problems like a breakdown.

How Southport Helps Homeowners Fix a Constantly Running Furnace

Our NATE-certified team of heating technicians has seen it all. A furnace that’s constantly running is just one of the many problems we solve for homeowners in River Hills.

When we schedule an appointment for furnace repair in River Hills, we’ll perform a series of in-person inspections and tests to narrow down the cause, such as:

• Checking your furnace for dirty coils or burners
• Inspecting electrical connections 
• Testing the pilot light 
• Reviewing the limit switch 
• Looking for related issues like ductwork or sizing issues

Once we complete our diagnostics, we’re prepared to spruce up your furnace in time for the cold season. A few offers we provide for a furnace running constantly in River Hills include:

• Coupons for heating-related visits like repair or inspection
• Loyalty referral program to enjoy extra deals for referring us
• Financing options to split up your investment

Want to stay on top of your furnace’s health? We offer a maintenance plan that covers heating, cooling, and plumbing basics at an affordable monthly price!

Sign Up for Southport’s Maintenance Plan

A furnace running constantly in River Hills isn’t a problem with Southport on your side. Our Shield Maintenance Plan provides yearly discounts, priority service, automated scheduling, and loyalty bonuses.

Ready to enjoy great service and even better savings? Fill out our online form to schedule furnace repair in River Hills. One of our team members will be happy to sign you up!